Where is the Exhaust on an Outboard Motor
The exhaust on an outboard motor is located at the back of the engine, near the propeller. The exhaust gases are expelled through a pipe that runs from the engine to the back of the boat.
If you’re like most people, you probably don’t give much thought to the exhaust on your outboard motor. But if you’re having trouble finding it, this blog post is for you! The exhaust on an outboard motor is located at the back of the engine, just above the waterline.
It’s a small hole that allows hot air and fumes to escape from the engine. If your boat is equipped with an exhaust hose, it will be attached to this hole. If you’re having trouble finding the exhaust on your outboard motor, simply look for the small hole at the back of the engine.
The Reason Outboards Squirt Water From the Exhaust!
Where is the Exhaust on a 2 Stroke Outboard?
The exhaust on a 2 stroke outboard is located at the back of the engine, near the propeller. The exhaust gases are expelled through this opening, and the propeller helps to push the boat forward.
Where is the Exhaust on a Outboard Engine?
If you’re looking for the exhaust on an outboard engine, it’s located at the back of the engine. The exhaust system on an outboard engine is responsible for getting rid of the fumes and gases that are produced when the engine is running. The exhaust gas is expelled through a pipe that runs from the back of the engine to the stern of the boat.
Is Water Supposed to Come Out of Outboard Exhaust?
There is a lot of debate on this topic and it largely depends on what model of outboard you have. Some models are designed so that water will come out of the exhaust while others are not. If your outboard does not have an internal water cooling system, then it is likely that water will come out of the exhaust when the engine is running.
This is not necessarily a bad thing, as it helps to cool the engine and prevents overheating. However, if too much water comes out of the exhaust, it can cause problems such as clogging up the engine or causing corrosion.
How Does an Outboard Exhaust System Work?
An outboard exhaust system is designed to expel water and fumes from the engine compartment of a boat. The system consists of an exhaust manifold, which is attached to the engine, and a series of pipes that carry the water and fumes away from the engine and out through the transom.
The exhaust manifold collects the water and fumes that are expelled by the engine cylinders and directs them into the exhaust pipes.
The exhaust pipes then carry the water and fumes away from the engine compartment and out through the transom.
Most outboard engines are equipped with an underwater discharge outlet, which allows the water and fumes to be discharged directly into the water behind the boat. This helps to prevent dreaded backfires, as well as keeping your boat smelling fresh!
Credit: www.youtube.com
Water Coming Out of Upper Exhaust on Outboard Motor
If you notice water coming out of the upper exhaust on your outboard motor, don’t panic! This is actually a fairly common occurrence, and there are a few possible explanations.
One possibility is that the engine is simply cooling off.
As the engine heats up during use, water is evaporated from the cooling system and expelled through the exhaust. This is perfectly normal and nothing to worry about.
Another possibility is that there may be a problem with the water pump impeller.
If the impeller isn’t working properly, it can cause water to be forced out of the exhaust. This is something that should be checked by a qualified mechanic.
Finally, it’s also possible that there is too much water in the engine’s cylinders.
This can happen if the engine has been sitting for a while without being used. When you first start up an engine that has been sitting, it’s normal for some water to be expelled through the exhaust until everything warms up and gets back to normal operating temperature.
Outboard Exhaust Modification
In the world of boat performance, one of the most popular modifications is an outboard exhaust modification. While this can provide your boat with a significant performance boost, it is important to understand the potential risks and rewards before making any changes to your outboard’s exhaust system.
The biggest potential benefit of an outboard exhaust modification is increased power.
By allowing your engine to breathe more freely, you can see gains in both horsepower and torque. This can be a particularly helpful mod if you frequently tow heavy loads or participate in watersports where a little extra power can go a long way.
Of course, with increased power comes increased noise.
If you’re looking for a stealthy operation, an outboard exhaust modification is probably not for you. But if you don’t mind turning some heads (and maybe even waking up the neighbors), then this mod can be a lot of fun.
Another thing to keep in mind is that an outboard exhaust modification will likely void your engine’s warranty.
So if something does go wrong, you could be on the hook for some expensive repairs. That said, many boaters feel that the risk is worth it for the performance gains that an outboard exhaust mod can provide.
If you’re thinking about giving your boat a little extra oomph with an outboard exhaust modification, make sure you do your research and understand all of the potential risks and rewards before taking the plunge.
Exhaust Relief Holes Outboard
Most outboard motors have exhaust relief holes near the bottom of the motor. These holes allow water to escape from the motor when it is running in shallow water. The holes also help to prevent the engine from overheating.
Conclusion
The exhaust on an outboard motor is located at the back of the engine, near the propeller. The purpose of the exhaust is to release fumes and noise from the engine. Most outboard motors have a water-cooled exhaust system, which uses a hose to circulate water around the engine and help keep it cool.
