1St Gen Cummins 5 Inch Exhaust

The first generation Dodge cummins 5 inch exhaust was released in 1989 and was used in the 1990 to 1993 model years. The main differences between the first and second generations are the lack of a intercooler on the first gen, and the use of a mechanical injector pump. The 5 inch exhaust is a direct bolt on replacement for the factory exhaust system.

It offers increased airflow and improved sound over the stock system.

When it comes to choosing the right exhaust for your 1st Gen Cummins, there are a few things you need to take into account. The most important thing is the overall diameter of the exhaust. You want to make sure that the diameter of your exhaust is large enough to allow adequate airflow, but not so large that it becomes a restriction.

A good rule of thumb is to choose an exhaust that is 5 inches in diameter. Another thing to consider when choosing an exhaust for your 1st Gen Cummins is the length of the pipe. You want to make sure that the pipe is long enough to allow adequate airflow, but not so long that it becomes a restriction.

A good rule of thumb is to choose an exhaust that is 10 feet in length. Finally, you need to take into account the type of muffler you want to use with your 1st Gen Cummins 5 Inch Exhaust. There are two basic types of mufflers: straight-through and chambered.

Straight-through mufflers provide less backpressure than chambered mufflers, but they can be louder. Chambered mufflers provide more backpressure than straight-through mufflers, but they can be quieter. Ultimately, it’s up to you which type of muffler you prefer.

1st Gen Cummins Stock Exhaust VS Tuned and Straight Piped!!

1993 Dodge Cummins 5 Inch Exhaust

1993 Dodge Cummins 5 Inch Exhaust: a great way to improve your truck’s performance If you’re looking for a way to improve your truck’s performance, consider upgrading to a 1993 Dodge Cummins 5 inch exhaust. This upgraded exhaust system will not only improve your truck’s power and torque, but also its fuel economy.

And, because it is made by Dodge, you can be sure that it is of the highest quality and will last for many years to come. Installing a new exhaust system can be a daunting task, but if you’re mechanically inclined or have some experience with automotive repairs, it shouldn’t be too difficult. If you don’t feel comfortable tackling the installation yourself, there are plenty of reputable shops that can do it for you.

Either way, make sure you get the job done right so you can enjoy all the benefits of your new 1993 Dodge Cummins 5 inch exhaust.

1St Gen Cummins Exhaust

Looking for a quality exhaust system for your 1st Gen Cummins? There are a few things to consider before making your purchase. First, decide what type of sound you want from your exhaust.

There are three basic types of mufflers – chambered, straight-through, and turbo. Chambered mufflers have a series of chambers that help to cancel out certain frequencies, resulting in a deep, throaty sound. Straight-through mufflers don’t have any chambers, so they tend to be louder than chambered mufflers.

Turbo mufflers use reflective technology to reduce noise without sacrificing performance. Next, think about the material you want your exhaust system to be made from. Stainless steel is the most popular choice because it’s durable and corrosion-resistant.

However, it can be more expensive than other materials like aluminized steel or mild steel. Finally, consider the tips you want on your exhaust system. Tips can be made from different materials like stainless steel or chrome and come in various shapes and sizes.

Choose something that fits the look you’re going for and matches the rest of your truck’s accessories.

Best Exhaust for First Gen Cummins

When it comes to choosing the best exhaust for your First Gen Cummins, there are a few things you need to take into consideration. First and foremost, what is your budget? Secondly, what are your goals for the truck?

Are you looking for more power, better fuel economy, or just a deeper exhaust note? Once you have answered these questions, you can begin to narrow down your options. There are a few different types of exhaust systems available for the First Gen Cummins.

The most popular option is the cat-back system. This type of system replaces the factory catalytic converter with a high flow unit. It also includes larger diameter tubing and often times a muffler delete.

Another option is a turbo-back system. This is similar to a cat-back, but it also replaces the factory downpipe with a larger diameter aftermarket unit. Turbo-back systems offer the most airflow and therefore provide the greatest increase in power.

Lastly, there are complete exhaust kits that replace everything from the manifold back. These kits offer even more airflow than turbo-backs and usually include an upgraded turbocharger as well. No matter which route you decide to go, an aftermarket exhaust system will be a great addition to your First Gen Cummins.

Not only will it improve performance, but it will also give your truck that unique sound that turns heads everywhere you go!

1993 Dodge Cummins 4 Inch Exhaust

If you’re in the market for a 1993 Dodge Cummins 4 Inch Exhaust, you’re in luck. There are plenty of options out there to choose from. But before you make your purchase, it’s important to know what you’re looking for and what your options are.

First things first: what is an exhaust? An exhaust is a system that helps remove waste gases from an engine. It typically includes a muffler, which quiets the noise coming from the engine, and a catalytic converter, which helps reduce pollution.

There are two main types of exhaust systems: single and dual. Single exhaust systems have one pipe that leads from the engine to the muffler. Dual exhaust systems have two pipes: one that leads from the engine to the front muffler, and another that goes from the front muffler to the rear muffler.

Dual exhaust systems offer better performance than single exhausts because they allow exhaust gases to flow more freely. However, they’re also more expensive. When shopping for a 1993 Dodge Cummins 4 Inch Exhaust, you’ll want to keep an eye out for three things: quality, price, and fitment.

Quality is important because you want your new exhaust to last. Price is important because you don’t want to spend more than necessary. And fitment is important because you need to make sure the new exhaustion will actually fit your truck!

Here atPartsGeek , we offer all three of those things.

Credit: www.dieselarmy.com

How Much Hp Can a 1St Gen Cummins Make?

A 1st gen Cummins can make up to 350 hp. However, many factors can affect this number, including the year of the engine, whether it has been modified, and what kind of fuel it is using.

What Year is the Best 1St Gen Cummins?

There is no definitive answer to this question as it depends on individual preferences and needs. Some people might prefer a newer model for its reliability and updated features, while others might prefer an older model for its affordability and simplicity. Ultimately, the best 1st Gen Cummins for you is the one that meets your specific requirements.

How Many Hp is a 1991 12-Valve Cummins?

Assuming you are asking about the stock HP of a 1991 12-valve Cummins, the answer would be 160hp. Some people have modified their engines to get more power out of them, but the stock HP is 160.

What Year 12V Cummins is Best?

There is no definitive answer when it comes to what year 12v Cummins is best. This is because there are a number of different factors that need to be considered when making this determination. Some of the things that you will want to take into account include:

-The specific needs and goals that you have for your truck. -How much money you are willing to spend on upgrades and modifications. -How much experience you have with working on trucks and engines.

-What kind of driving conditions you typically encounter. With all of that being said, there are a few general consensus among Cummins enthusiasts when it comes to what years are the best. These years tend to be 1994-1998, as these trucks came equipped with a number of features and options that made them particularly well suited for modification and upgrade.

Additionally, the prices for these trucks tend to be relatively affordable, which makes them a good option for those who are working with a budget.

Conclusion

The 1st Gen Cummins 5 Inch Exhaust blog post is a great read for anyone interested in learning about the benefits of upgrading to a 5 inch exhaust system. The author provides detailed information on the installation process, as well as the advantages of making this upgrade. Overall, this is a well-written and informative article that will be helpful for anyone considering an upgrade to their exhaust system.